浅谈桥梁深基坑挡土墙防护施工方案

本文根据该项工程实际情况和相关技术标准、水文地质特征,对施工准备、测量放线、基坑开挖、挡土墙施工、基坑监测等关键部分进行深入研究。     

地埋管换热器分区运行对土壤热堆积特性影响的研究

为了缓解埋管区域土壤的热量堆积问题,提出了埋管换热器按内中外、块状、间隔三种分区运行的策略,利用CFD软件建立了10×10的井群换热模型,对地源热泵系统在三种分区与不分区运行策略下运行十年进行数值模拟,分析不同分区运行策略对土壤温度分布和土壤热堆积特性的影响。模拟结果可知:不分区、内中外分区、块状分区、间隔分区四种运行策略下埋管区域的平均温度分别为25.23、23.31、23.06、23.28℃,最高温度分别为40.62、32.77、40.65、38.93℃;分区运行较不分区运行可以有效缓解热堆积作用,埋管区域整体温度较不分区运行时降低了2.00℃左右,内中外分区策略可以显著缓解埋管区域热堆积。     

于都黄麟-祁禄山地区土地质量地球化学评价

通过对于都县黄麟-祁禄山地区开展1:5万土地质量地球化学调查,在野外土壤样品采集和化验测试的基础上,系统地研究了影响土地质量的各项地球化学指标特征与控制因素,基本查明有益元素、重金属元素分布,划分出重点污染区和绿色土地发展区,并进行土地质量等级评价,为永久基本农田建设、土地资源开发与利用等方面提出建议。     

改良剂对重金属污染根际土壤理化性质影响的研究进展

针对现阶段土壤中重金属污染较为严重的问题及各类修复方法各有利弊的现状,分析了近年来相关学者对于改良剂对重金属污染根际土壤理化性质影响的研究进展,研究了常见有机和无机改良剂对重金属胁迫下根际土壤pH值、氧化还原电位(Eh)、酶活性、化学性质、微生物菌落种群等理化性质的影响以及对重金属的化学沉淀和溶解平衡的影响。后期应加强超富集植物与一般植物根际、非根际理化性质的差异研究;土壤中重金属种类及污染程度与根际土壤理化性质的关系研究;土壤中其他环境因子的影响以及根际土壤中重金属的作用机理方面的研究。     

基于平面复合降阻材料的杆塔基础接地降阻研究

杆塔基础自然接地作为输电线路重要的接地装置,能减少外延接地及降阻施工成本。针对特高压输电线路杆塔基础接地提出基于平面复合降阻材料的塔基外敷接地降阻策略,首先,采用CDEGS仿真计算软件建立特高压杆塔单根浇注桩接地计算模型,分析均匀土壤、多层土壤、混合土壤三种条件下的外敷接地降阻效果;然后,通过单个塔基外敷计算模型分析外敷材料不同敷设方式的降阻效率;最后,计算完整杆塔基础外敷接地降阻效率和散流分布特征,并与水平人工外延接地降阻方式进行对比。结果表明,外敷接地降阻效率与土壤条件、敷设位置等因素有关,在高土壤电阻率条件下,塔基外敷接地降阻效率超过22%,与水平人工外延接地相比,塔基外敷接地降阻的散流比超过96%,接地材料利用率高,可减少征地和二次接地施工成本。     

Critical state model for structured soil

Structure is an evident determinant for macroscopic behaviors of soils. However, this is not taken into account in most constitutive models, as structure is a rather complex issue in models. For this, it is important to develop and implement simple models that can reflect this important aspect of soil behavior. This paper tried to model structured soils based on well-established concepts, such as critical state and sub-loading. Critical state is the core of the classic Cam Clay model. The sub-loading concept implies adoption of an inner (sub-loading) yield surface, according to specific hardening rules for some internal strain-like state variables. Nakai and co-workers proposed such internal variables for controlling density (ρ) and structure (ω), using a modified stress space, called t_ij. Herein, similar variables are used in the context of the better-known invariants (p and q) of the Cam Clay model. This change requires explicit adoption of a non-associated flow rule for the sub-loading surface. This is accomplished by modifying the dilatancy ratio of the Cam Clay model, as a function of the new internal variables. These modifications are described and implemented under three-dimensional (3D) conditions. The model is then applied to simulating laboratory tests under different stress paths and the results are compared to experiments reported for different types of structured soils. The good agreements show the capacity and potential of the proposed model.     

谈淤泥质复杂基坑地基处理及支护技术

淤泥质地形在施工过程中可能因地基强度不够而发生事故,施工难度高,对此类地基处理及支护技术的研究较为重要。     

Quality assurance and quality control of subgrade compaction using the dynamic cone penetrometer

The Dynamic Cone Penetrometer (DCP) is a device that is used in the construction industry for the assessment of in situ soil compaction quality. Over the past few decades, numerous correlations have been developed between the DCP test results and soil strength and stiffness parameters. This paper proposes a comprehensive set of criteria and recommendations for quality control (QC) of compacted subgrade that take into account the inherent statistical variability of DCP test results. For the development of the QC criteria, a new statistical methodology is used to extract representative test values from the raw field DCP test data. In order to use the proposed QC criteria, soils are first classified into two broad categories (fine-grained and coarse-grained) depending on their fabric and response to compaction efforts. Test results indicate that (i) for fine-grained soils, the DCP test values have good correlation with the plasticity index (PI), which is indicative of the type and amount of clay content of the soil and (ii) for coarse-grained soils, the DCP test values have good correlation with the optimum water content of the soil, which is directly related to its in situ density. DCP blow count correlation equations are presented for both soil categories. Recommendations for field DCP testing and data analysis are also provided to highlight the significance of the statistical distribution of the DCP test results in QC testing of compacted subgrade.